Profil Calon Promotor

# Tahun Penelitian
1 2017 Unjuk Kinerja FlotasiKolom pada Bijih Galena PbS Menggunakan Sinyal Kapasitansi
Peran: Sumber Dana: PUPT
2 2016 Pemindaian Langsung Kinerja Flotasi PbS-SiO2 pada Flotasi Kolom Berbassis Pengukuran Kapasitansi
Peran: Sumber Dana: DIKTI-UI
3 2016 Karakteristik Sifat Mekanik dan Korosi Pada Kandidat Material Implan Mg-1,6Gd Setelah Canai Panas dengan Reduksi Ketebalan 95%
Peran: Sumber Dana: DIKTI-UI
4 2016 Hilirisasi Olah Murni Mineral Pembawa Logam Tanah Jarang (Nd, Pr, Sm) untuk Bahan Baku Magnet Permanen dan Industri Manufaktur
Peran: Anggota Sumber Dana: InSinNas
5 2015 Artefak Logam Goa Made:Kajian Gay Seni dan ArkeoMetalurgi
Peran: Anggota Sumber Dana: Multidisiplin
6 2015 Ekstraksi Logam Tanah Jarang Bernilai Ekonomi Tinggi, Lantanum dan Yttrium dari Limbah Tailing Bauksit di Pulau Bintan
Peran: Anggota Sumber Dana: Kolaborasi Nasional
7 2014 Aplikasi Plasma Non Thermal untuk Presipitasi TiO2 dari Pelindian Ilmenit
Peran: Ketua Sumber Dana: PUPTN
8 2014 Ektraksi Lithium untuk Aplikasi Li Battere (2/2)
Peran: Anggota Sumber Dana: Konsorsium SINAS Ristek
9 2014 Pengembangan Material Penyimpan Hidrogen
Peran: Sumber Dana: DIKTI
10 2013 Aplikasi Plasma Non Thermal untuk Presipitasi TiO2 dari Pelindian Ilmenit (1/2)
Peran: Ketua Sumber Dana: PUPTN
11 2013 Ektraksi Lithium untuk Aplikasi Li Battere (1/2)
Peran: Anggota Sumber Dana: Konsorsium SINAS Ristek
12 2012 Pengembangan Material Biomedik Berkemampuan Luruh Alami berbasis Fe-Mn-C
Peran: Ketua Sumber Dana: DIKTI
13 2011 Fabrikasi Semikonduktor Fe(III)-TiO2 dari Ilmenit Lokal Untuk Aplikasi Sel surya Tersensitasi Zat Warna
Peran: Anggota Sumber Dana: DIKTI
14 2011 Pemanfaatan Pasir Besi Untuk Aplikasi Teknik
Peran: Anggota Sumber Dana: SINAS Ristek
15 2011 Pengembangan Material Penyimpan energi Gas Hidrogen Berbasis Partikel Nano Karbon Aktif
Peran: Anggota Sumber Dana: Dikti
# Tahun Publikasi
1 2020 Cooling rate observation in quenching process using carbon nanofluids for S45C carbon steel
Jurnal: Key Engineering Materials, vol. 833 KEM
2 2020 Degradation characterization and mechanisms of warm rolled Mg-1.6Gd with 95% reduction ratio for bio
Jurnal: Archives of Metallurgy and Materials, vol. 65
3 2020 Degradation characteristics of porous Fe-Mn-C alloys obtained by sintering-dissolution process (SDP) for metallic bone scaffold
Jurnal: Sains Malaysiana, vol. 49
4 2020 Effect of sulfur and sodium sulfate on phase transformation and microstructure on carbothermic reduction of Indonesian ilmenite
Jurnal: IOP Conference Series: Materials Science and Engineering, vol. 833
5 2020 Electrochemical Behavior of Nickel Laterite Ores Dissolution in Sulphuric Acid Solutions
Jurnal: IOP Conference Series: Materials Science and Engineering, vol. 833
6 2020 Degradation characteristics of mg-1,6gd alloy at low thickness reduction of warm rolling
Jurnal: Materials Science Forum, vol. 1000 MSF
7 2020 Solar Carbothermic Reduction of Ilmenite Using Palm Kernel Shell Biomass
Jurnal: JOM, vol. 72
8 2020 Optimizing extraction and enrichment of lanthanide from indonesian low grade bauxite using sequentia
Jurnal: Engineering Journal, vol. 24
9 2020 Thermodynamics and phase transformation analysis on selective sulphidation of limonitic nickel ores mixed with carbon additives
Jurnal: AIP Conference Proceedings, vol. 2255
10 2020 The effect of calcination temperature on metakaolin characteristic synthesized from badau belitung kaolin
Jurnal: Key Engineering Materials, vol. 841 KEM
11 2019 Leaching Kinetics of Lanthanide in Sulfuric Acid from Low Grade Bauxite
Jurnal: Materials Today: Proceedings, vol. 18
12 2019 Application of carbamide as foaming agent of FE-MN-C alloy for degradable biomaterial candidate with
Jurnal: Jurnal Teknologi, vol. 81
13 2019 Additional of NaCl on Chloride Leaching of Gold Ore from Indonesian Artisanal Mining
Jurnal: IOP Conference Series: Materials Science and Engineering, vol. 515
14 2019 Production of pig iron nugget from low-grade iron ore and pyrolyzed oil-palm-empty-fruit-bunch compo
Jurnal: IOP Conference Series: Materials Science and Engineering, vol. 602
15 2019 Sulfides formation in carbothermic reduction of saprolitic nickel laterite ore using low-rank coals
Jurnal: Minerals, vol. 9
16 2019 A Comparative Study on Commercial Grade and Laboratory Grade of TiO2 particle in Nanoflui
Jurnal: IOP Conference Series: Materials Science and Engineering, vol. 622
17 2019 Investigations on mineralogical characteristics of Indonesian nickel laterite ores during the roasti
Jurnal: IOP Conference Series: Materials Science and Engineering, vol. 541
18 2019 Observation on Cetyl Trimethyl Ammonium Bromide Addition as Cationic Surfactant on Water-based Carbo
Jurnal: IOP Conference Series: Materials Science and Engineering, vol. 547
19 2019 Effect of Titanium Dioxide Particle Size in Water-based Micro/Nanofluid as Quench Medium in Heat Tre
Jurnal: IOP Conference Series: Materials Science and Engineering, vol. 547
20 2019 Thermal characteristics and phase transformation of iron ores containing varied crystalline water wi
Jurnal: IOP Conference Series: Materials Science and Engineering, vol. 602
21 2019 Characterization on particle size distribution of reduced lateritic nickel ore using biomass carbon
Jurnal: IOP Conference Series: Materials Science and Engineering, vol. 602
22 2019 Effect of Sodium Dodecylbenzene Sulfonate as Anionic Surfactant on Water based Carbon Nanofluid Perf
Jurnal: IOP Conference Series: Materials Science and Engineering, vol. 622
23 2019 Polyethylene Glycol Addition as Non-ionic Surfactant in Water-based Carbon Microfluid for Quench Med
Jurnal: IOP Conference Series: Materials Science and Engineering, vol. 622
24 2019 Corrosion behavior of hot rolled Mg-1.6Gd alloys as degradable materials implant
Jurnal: AIP Conference Proceedings, vol. 2180
25 2019 A Preliminary study of three-phase column flotation process monitoring using electrical capacitance
Jurnal: IOP Conference Series: Materials Science and Engineering, vol. 673
26 2018 Selective sulphidation of impurities in weathered ilmenite. Part 1 – Applicability to different il
Jurnal: Minerals Engineering, vol. 121
27 2018 Characterization and observation of water-based nanofluids quench medium with carbon particle conten
Jurnal: AIP Conference Proceedings, vol. 1964
28 2018 Degradable and porous Fe-Mn-C alloy for biomaterials candidate
Jurnal: AIP Conference Proceedings, vol. 1933
29 2018 Characterization of water based nanofluid for quench medium
Jurnal: IOP Conference Series: Materials Science and Engineering, vol. 348
30 2018 Effect of Mechanochemical and Roasting Techniques for Extraction of Rare Earth Elements from Indones
Jurnal: IOP Conference Series: Materials Science and Engineering, vol. 316
31 2018 The preparation of activated carbon from coconut shell charcoal by novel mechano-chemical activation
Jurnal: Materials Science Forum, vol. 929 MSF
32 2018 Electrical capacitance volume tomography validation of column flotation process with gas injection v
Jurnal: Engineering Journal, vol. 22
33 2018 Characterization of oil based nanofluid for quench medium
Jurnal: IOP Conference Series: Materials Science and Engineering, vol. 299
34 2018 The hydrogen adsorption behavior of Mechano-Chemically activated carbon from Indonesian low-rank coa
Jurnal: International Journal of Technology, vol. 9
35 2018 Screening of proteins based on macro-algae from West Java coast in Indonesian marine as a potential
Jurnal: AIP Conference Proceedings, vol. 1933
36 2018 Investigation of column flotation process on sulphide ore using 2-electrode capacitance sensor: The
Jurnal: AIP Conference Proceedings, vol. 1945
37 2018 Chloride solution leaching of platinum from Indonesia gold ore artisanal mining
Jurnal: IOP Conference Series: Materials Science and Engineering, vol. 432
38 2017 Column flotation monitoring based on electrical capacitance volume tomography: A preliminary study
Jurnal: AIP Conference Proceedings, vol. 1805
39 2017 Effect of severe reduction on mechanical properties during hot rolling of Mg-1.6Gd alloys
Jurnal: Materials Research Express, vol. 4
40 2017 Low-Temperature Carbothermic Reduction of Indonesia Nickel Lateritic Ore with Sub-Bituminous Coal
Jurnal: IOP Conference Series: Materials Science and Engineering, vol. 202
41 2017 Microstructure Transformation of Mg-1.6Gd during Hot Rolled at High Deformation Ratio
Jurnal: IOP Conference Series: Materials Science and Engineering, vol. 202
42 2017 The Effect of Flotation Reagents Addition (MIBC and PAX) on the Relative Permittivity Value Using 2-
Jurnal: Procedia Engineering, vol. 170
43 2017 Simulation of Monitoring Column Flotation Process using Electrical Capacitance Tomography Volume
Jurnal: Engineering Journal, in preparation
44 2016 Green and smart materials properties design and production for sustainable future
Jurnal: International Journal of Technology, vol. 7
45 2016 Effect of manganese on intermetallic layer morphology between dies and Al-Si alloy
Jurnal: 72nd World Foundry Congress, WFC 2016, vol.
46 2016 The effect of Flotation Reagents Addition (MIBC and PAX) on The relative Permittivity Value Using 2-Electrode Capacitance Sensor,
Jurnal: Procedia Engineering, xx (2016), xxx-xxx.
47 2016 Selective reduction of Indonesia Lateritic Nickel Ore using Low grade carbon as reductant
Jurnal: In preparation
48 2016 Microstructure and Mechanical Properties of Hot Rolled Mg-1.6Gd
Jurnal: Materials Express, xx (2016)
49 2015 Applications of a green chemistry design, a clean environment, and bioenergy to promote the sustaina
Jurnal: International Journal of Technology, vol. 6
50 2015 Hydrogen adsorption capacity reduction of activated carbon produced from Indonesia low rank coal by
Jurnal: Sains Malaysiana, vol. 44
51 2015 Hydrogen Adsorption Capacity Reduction of Activated CarbonProduced from Indonesia Low Rank Coal by Pelletizing,
Jurnal: Sains Malaysiana Vol. 44 No. 5 Mei 2015, p. 747-752
52 2015 SiO2-MgO Ratio Effect on Carbothermic reaction of Synthetic Nickelliferrous Mixtures
Jurnal: Advanced Materials Research Vol. 1112, pp. 542-545.
53 2015 Microstructure and Mechanical Properties of Extruded Mg-1.6Gd as Prospective Degradable Implant Materials
Jurnal: Advanced Materials Research, Vols. 896, pp. 613-616
54 2014 Microalloying of Fe-Cr by using ultrasonic irradiation
Jurnal: International Journal of Technology, vol. 5
55 2014 Influence of oxygen on microstructures of Ti-Mo-Cr alloy
Jurnal: Advanced Materials Research, vol. 896
56 2014 Influence of Oxygen on Microstructures of Ti-Mo-Cr alloy.
Jurnal: Advanced Materials Research Vols. 789, pp. 522-530
57 2013 Stability of the Beta Phase in Ti-Mo-Cr alloy Fabricated by Powder Metallurgy,
Jurnal: Advanced Materials Research, Vols. 789, pp. 210-214
58 2013 Sulfuric Acid Leaching of Bangka Indonesia Ilmenite Ore and Ilmenite Decomposed by NaOH,
Jurnal: Advanced Materials Research, Vols. 789, pp. 132-137
59 2013 Properties of Fe-Mn-C Alloy as Degradable Biomaterials Candidate for Coronary Stent,
Jurnal: Advanced Materials Research Vols. 774-776, pp. 682-686
60 2013 Optimizing the Nanostructural Characteristics of Chemical Bath Deposition derived ZnO Nanorods by Post-Hydrothermal Treatments,
Jurnal: Advanced Materials Research, Vols. 789, pp. 132-137
61 2013 Thermogravimetric Analysis of The Reduction of Iron Ore with Hydroxyl Content,
Jurnal: Advanced Materials Research Vols. 774-776, pp. 682-686
62 2013 The Effect of Addition of Multi Wall Carbon Nano Tubes (MWCNT)Reinforcement to the Characteristics of Carbon Composite Bipolar Plate,
Jurnal: Applied Mechanics and Materials, Vol. 281, pp. 490-495
63 2013 Reduction of Composite Pellet Containing Indonesia Lateritic Iron Ore as Raw Material for Producing TWDI,
Jurnal: Materials Science Forum,Vol. 737, pp. 98-104
64 2013 Hydrogen Adsortion Behavior of Mechanically Milled and Pelletized Coconut Shell activated Carbon,
Jurnal: Applied Mechanics and Materials, Vol. 268-270, pp. 104-110
65 2013 The Effects of Carbon Black Loading on The Characteristics of Carbon Composite Bipolar Plate by utilizing Graphite Waste Products,.
Jurnal: International Journal of Engineering and Technology IJET-IJENS Vol. 12 No. 05. P. 108-112.
66 2012 The Effect of Rotational Speed to the Forming of Intermetallic Layer on Tempered H13 Steel Surface in a Die Casting Process of Al-12%Si Alloy
Jurnal: International Journal of Engineering and Technology IJET-IJENS
67 2012 Studi Perbandingan Efek Fotokatalisis Fe2O3-TiO2 Hasil ekstraksi Ilmenit Bangka dan P-25 Degussa untuk Aplikasi Pengolahan Limbah Cair TPA Cilowong
Jurnal: Metalurgi vol. 27 No. 3, pp. 251-262
68 2012 One Dimensional ZnO Nanostructures by Wet-Chemistry for Dye Sensitized Solar Cell Application,
Jurnal: Advanced Materials Research Vol. 576, pp.406-412
69 2012 Corrosion Behavior of Fe-Mn-C Alloy as Degradable Materials Candidate Fabricated via Powder Metallurgy Process.
Jurnal: Advanced Materials Research Vol. 576, pp 386-389