Profil Calon Promotor

# Tahun Penelitian
1 2020 Fabrikasi Nanotube TiO2 dari Hasil Ekstraksi Mineral Lokal Ilmenite Indonesia untuk Pengolahan Limbah Tekstil
Peran: Ketua Sumber Dana: Hibah Skema Publikasi Terindeks Internasional (PUTI) Universitas Indonesia-Skema Doktor
2 2020 Pengembangan Kawat Superkonduktor Berbasis Keramik untuk Aplikasi Motor Kendaraan Listrik Efisiensi Tinggi
Peran: Ketua Sumber Dana: Hibah Skema Publikasi Terindeks Internasional (PUTI) Universitas Indonesia-Skema Doktor
3 2020 Peningkatan Performa Anoda Baterai Lithium dengan Material Lithium Titanate (LTO) Berdoping Ion Alumunium
Peran: Ketua Sumber Dana: Hibah Skema Publikasi Terindeks Internasional (PUTI) Universitas Indonesia-Skema Doktor
4 2020 Modifikasi Ukuran dan Bentuk Nanostruktur Semikonduktor Oksida dan Pengaruhnya terhadap Performa Fotokatalisis
Peran: Ketua Sumber Dana: Hibah Skema Publikasi Terindeks Internasional (PUTI) Universitas Indonesia-Skema Prosiding
5 2019 Fabrikasi Li4AlxTi5-xO12/C Berpori dengan Metode Sol-Gel untuk Anoda Baterai Ion Lithium
Peran: Ketua Sumber Dana: Hibah Kompetitif Publikasi Internasional Terindeks Tugas Akhir (PITTA) Universitas Indonesia-Skema Doktor
6 2019 Reduksi Grafin Oksida Berbasis Arang Batok Kelapa menggunakan Reduktor Alami Ampas Kopi dan Kulit Jeruk
Peran: Ketua Sumber Dana: Hibah Kompetitif Publikasi Internasional Terindeks Tugas Akhir (PITTA) Universitas Indonesia-Skema B
7 2019 Nanokomposit Titanium Dioksida-Grafin Oksida Tereduksi (TiO2/RGO) untuk Aplikasi Sel Surya Tersensitasi Zat Pewarna
Peran: Ketua Sumber Dana: Hibah Kompetitif Publikasi Internasional Terindeks Tugas Akhir (PITTA) Universitas Indonesia-Skema A
8 2018 Integrasi Grafin Hasil Sumber Daya Alam Lokal Indonesia untuk Sel Surya Tersensitasi Zat Pewarna Berbasis Nanorod ZnO
Peran: Ketua Sumber Dana: Hibah Penelitian Dasar Unggulan Perguruan Tinggi (PDUPT)-Desentralisasi KEMRISTEKDIKTI
9 2018 Fabrikasi Lapisan Tipis Nanorods Seng Oksida (ZnO) Melalui Metode Chemical Bath Deposition (CBD) Untuk Aplikasi Transparent Heaters
Peran: Ketua Sumber Dana: Hibah Publikasi Internasional Terindeks Untuk Tugas Akhir Mahasiswa (PITTA) Universitas Indonesia
10 2017 Optimasi Karakteristik Nanorod ZnO sebagai Lapisan Aktif Semikonduktor pada Sel Surya Tersensitasi Zat Pewarna dan Lapisan Anti-Pantulan pada Sel Surya Silikon (Tahun Ketiga)
Peran: Ketua Sumber Dana: Hibah Penelitian Unggulan Perguruan Tinggi (PUPT)-Desentralisasi DIKTI (Tahun Ketiga)
11 2016 Optimasi Karakteristik Nanorod ZnO sebagai Lapisan Aktif Semikonduktor pada Sel Surya Tersensitasi Zat Pewarna dan Lapisan Anti-Pantulan pada Sel Surya Silikon (Tahun Kedua)
Peran: Ketua Sumber Dana: Hibah Penelitian Unggulan Perguruan Tinggi (PUPT)-Desentralisasi DIKTI (Tahun Kedua)
12 2015 Optimasi Karakteristik Nanorod ZnO sebagai Lapisan Aktif Semikonduktor pada Sel Surya Tersensitasi Zat Pewarna dan Lapisan Anti-Pantulan pada Sel Surya Silikon (Tahun Pertama)
Peran: Ketua Sumber Dana: Hibah Penelitian Unggulan Perguruan Tinggi (PUPT)-Desentralisasi DIKTI (Tahun Pertama)
13 2015 Fabrikasi Kaca Konduktor Flourine Tin Oxide (FTO) dengan Metode Sol-Gel Berbasis Prekursor Timah Klorida untuk Aplikasi Sel Surya Tersensitasi Zat Pewarna
Peran: Ketua Sumber Dana: Hibah Pascasarjana DRPM-UI
# Tahun Publikasi
1 2020 Dielectric Breakdown Strength and Energy Storage Density of CCTO-ZBS Electroceramic
Jurnal: IOP Conference Series: Earth and Environmental Science, 2020, 596(1), 012006
2 2020 Synthesis of titanium oxysulfate from ilmenite through hydrothermal, water leaching and sulfuric acid leaching routes
Jurnal: AIP Conference Proceedings, 2020, 2262, 70006
3 2020 Optoelectronic properties of zno nanorods thin films derived from chemical bath deposition with different growth times
Jurnal: AIP Conference Proceedings, 2020, 2262, 30008
4 2020 Green reduction of graphene oxide using a mixture of chocolate and coffee powder
Jurnal: AIP Conference Proceedings, 2020, 2255, 0600371
5 2020 The effect of additional zinc oxide to antibacterial property of chitosan/collagen-based scaffold
Jurnal: Materials Science Forum, 2020, 1000 MSF, pp. 107–114
6 2020 Delamination damages of drilling epoxy/carbon/basalt fiber reinforced hybrid composites using conventional drill machine
Jurnal: Materials Science Forum, 2020, 1000 MSF, pp. 151–159
7 2019 Effects of seeding temperature and growing time on the nanostructural characteristics of ZnO nanorods thin films prepared by chemical bath deposition
Jurnal: Journal of Physics: Conference Series, 2019, 1402(5), 055099
8 2019 Fabrication of Titanium Dioxide-reduced Graphene Oxide (TiO2/rGO) nanocomposites as the Photoanode in Dye Sensitized Solar Cells
Jurnal: Journal of Physics: Conference Series, 2019, 1402(5), 055101
9 2019 Effect of reduced graphene oxide addition on the performance of zinc oxide nanorod based dye-sensitized solar cell
Jurnal: Journal of Physics: Conference Series, 2019, 1402(6), 066017
10 2019 The effect of silver nitrate addition on antibacterial properties of bone scaffold chitosan-hydroxyapatite
Jurnal: AIP Conference Proceedings, 2019, 2193, 020014
11 2019 The study of zinc oxide addition into hydroxyapatite/chitosan scaffold for bone tissue engineering application
Jurnal: AIP Conference Proceedings, 2019, 2193, 020016
12 2019 Extraction of collagen Type-I from snakehead fish skin (Channa striata) and synthesis of biopolymer for wound dressing
Jurnal: AIP Conference Proceedings, 2019, 2193, 020013
13 2019 Effect of interlaminated carbon and basalt fiber reinforced hybrid composites on mode i fracture toughness
Jurnal: IOP Conference Series: Materials Science and Engineering, 2019, 553(1), 012035
14 2019 Synthesis of TiO2 nanoparticles at low hydrothermal temperature and its performance for DSSC sensitized using natural dye extracted from Melastoma malabathricum L. seeds
Jurnal: International Journal of Energy Research, 2019, 43(11), pp. 5959–5968
15 2019 Optical properties of ZnO nanorods derived from chemical bath deposition process with different seeds solution concentration
Jurnal: IOP Conference Series: Materials Science and Engineering, 2019, 541(1), 012034
16 2019 Synthesis and characterization of nano rosette TiO2 and CH3NH3PbCl2I for potential use in perovskite solar cell
Jurnal: IOP Conference Series: Materials Science and Engineering, 2019, 541(1), 012048
17 2019 The influence of different seeds solution concentration upon chemical bath deposition process on the morphology of ZnO nanorods
Jurnal: Journal of Physics: Conference Series, 2019, 1170(1), 012059
18 2019 Effects of annealing temperature on the electrochemical characteristics of ZnO microrods as anode materials of lithium-ion battery using chemical bath deposition
Jurnal: Ionics, 2019, 25(2), pp. 457–466
19 2019 Effect of NaCl addition on nano rosette TiO2 crystal growth during hydrothermal deposition
Jurnal: International Journal of Technology, 2019, 10(6), pp. 1235–1242
20 2019 Enhanced Device Performance of Bulk Heterojunction (BHJ) Hybrid Solar Cells Based on Colloidal CdSe Quantum Dots (QDs) via Optimized Hexanoic Acid-Assisted Washing Treatment
Jurnal: Advances in Materials Science and Engineering, 2019, 2019, 7516890
21 2018 Characteristics of nano rosette Tio2 hydrothermally grown on a glass substrate at different reaction times and acid concentrations
Jurnal: International Journal of Technology, 2018, 9(6), pp. 1196–1204
22 2018 Nanostructural growth investigation of Zno nanorods derived from chemical bath deposition for transparent heater application
Jurnal: International Journal of Technology, 2018, 9(6), pp. 1216–1224
23 2018 Optimization of Li 4 Ti 5 O 12 (LTO) performance through the addition of ZnO-Nanorods using sol-gel solid-state method process as half-cell lithium-ion battery anode
Jurnal: E3S Web of Conferences, 2018, 67, 03028
24 2018 Performance of post-hidrothermally treated xerogel TiO2 dye-sensitized solar cell (DSSC) and its nanostructure characteristic
Jurnal: IOP Conference Series: Materials Science and Engineering, 2018, 432(1), 012030
25 2018 Electrical, optical and structural properties of FTO thin films fabricated by spray ultrasonic nebulizer technique from SnCl4 precursor
Jurnal: AIP Conference Proceedings, 2018, 1964, 020001
26 2018 Characteristics of carbon pyrolyzed from table sugar and sucrose for Pt-less DSSC counter electrode
Jurnal: International Journal of Technology, 2018, 9(2), pp. 372–379
27 2018 Preparation of anatase TiO2 nanoparticles using low hydrothermal temperature for dye-sensitized solar cell
Jurnal: IOP Conference Series: Materials Science and Engineering, 2018, 316(1), 012055
28 2018 The influence of phosphorylation and freezing temperature on the mechanical properties of hydroxyapatite/chitosan composite as bone scaffold biomaterial
Jurnal: AIP Conference Proceedings, 2018, 1933, 020010
29 2018 The effect of hydroxyapatite addition on the mechanical properties of polyvinyl alcohol/chitosan biomaterials for bone scaffolds application
Jurnal: AIP Conference Proceedings, 2018, 1933, 020006
30 2018 Improved device performance of Bulk Heterojunction (BHJ) hybrid solar cells by optimization CdSe QDs/PCPDTBT ratio
Jurnal: 4th IEEE International Conference on Engineering Technologies and Applied Sciences, ICETAS 2017,
31 2018 Visible light absorption and photosensitizing characteristics of natural yellow 3 extracted from Curcuma Longa L. for Dye-Sensitized solar cell
Jurnal: IOP Conference Series: Earth and Environmental Science, 2018, 105(1), 012073
32 2018 The compressive strength of coconut fibers reinforced NANO concrete composite
Jurnal: Materials Science Forum, 2018, 943 MSF, pp. 105–110
33 2018 Integration of multiwalled carbon nanotubes in bulk heterojunction cdse/pcpdtbt hybrid solar cells
Jurnal: Materials Science Forum, 2018, 929 MSF, pp. 150–157
34 2018 Visible light absorption and photo-sensitizing characteristics of natural dye extracted from mangosteen pericarps using different solvents
Jurnal: International Journal on Advanced Science, Engineering and Information Technology, 2018, 8(5), pp.
35 2018 Nanostructure properties and dye-sensitized-solar-cell open-circuit voltage of a Tio2 aerogel and pre-hydrothermally treated xerogels
Jurnal: International Journal of Technology, 2018, 9(5), pp. 972–982
36 2018 Tensile behavior of composite concrete reinforced sugar palm fiber
Jurnal: Key Engineering Materials, 2018, 777 KEM, pp. 471–475
37 2018 Effect of sic and sintering temperature variations on the characteristic of fe-sheathed mgb2 superconductor wires
Jurnal: Materials Science Forum, 2018, 929 MSF, pp. 27–32
38 2017 Thermal conductivity of carbon/basal fiber reinforced epoxy hybrid composites
Jurnal: International Journal of Technology, 2017, 8(8), pp. 1498–1506
39 2017 Fabrication of solar cells with TiO2 nanoparticles sensitized using natural dye extracted from mangosteen pericarps
Jurnal: International Journal of Technology, 2017, 8(7), pp. 1229–1238
40 2017 The effect of various precursors and solvents on the characteristics of fluorine-doped tin oxide conducting glass fabricated by ultrasonic spray pyrolysis
Jurnal: International Journal of Technology, 2017, 8(7), pp. 1336–1344
41 2017 Effect of post-hydrothermal treatments on the physical properties of ZnO layer derived from chemical bath deposition
Jurnal: International Journal of Technology, 2017, 8(4), pp. 651–661
42 2017 Investigating the effect of various extracting solvents on the potential use of red-apple skin (Malus domestica) as natural sensitizer for dye-sensitized solar cell
Jurnal: AIP Conference Proceedings, 2017, 1826, 020006
43 2017 The effect of substrate heating temperature upon spray pyrolysis process on the morphological and functional properties of fluorine tin oxide conducting glass
Jurnal: AIP Conference Proceedings, 2017, 1826, 020003
44 2017 Properties of carbon nanotubes-doped Fe-sheath MgB2 for superconducting wires
Jurnal: AIP Conference Proceedings, 2017, 1826, 020007
45 2017 Effect of freezing temperature in thermally induced phase separation method in hydroxyapatite/chitosan-based bone scaffold biomaterial
Jurnal: AIP Conference Proceedings, 2017, 1817, 020007
46 2017 Investigating the weight ratio variation of alginate-hydroxyapatite composites for vertebroplasty method bone filler material
Jurnal: AIP Conference Proceedings, 2017, 1817, 020006
47 2017 Ex-situ manufacturing of SiC-doped MgB2 used for superconducting wire in medical device applications
Jurnal: AIP Conference Proceedings, 2017, 1817, 020010
48 2016 Optical transmittance, electrical resistivity and microstructural characteristics of undoped and fluorine-doped tin oxide conductive glass fabricated by spray pyrolysis technique with modified ultrasonic nebulizer
Jurnal: International Journal of Technology, 2016, 7(8), pp. 1316–1325
49 2016 The production study of bipolar plate from cuprumcarbon nanocomposite in polypropylene matrix (PP) for the fuel cell application
Jurnal: ARPN Journal of Engineering and Applied Sciences, 2016, 11(2), pp. 1303–1308
50 2016 Effect of pressure in post-hydrothermal treatment on the nanostructural characteristics of ZnO nanoparticles
Jurnal: International Journal of Technology, 2016, 7(3), pp. 424–430
51 2015 The effects of annealing temperature and seed layer on the growth of ZNO nanorods in a chemical bath deposition process
Jurnal: International Journal of Technology, 2015, 6(4), pp. 565–572
52 2015 Effect of citric acid addition upon the precipitation process on the nanostructural characteristics of ZnO nanoparticles
Jurnal: International Journal of Technology, 2015, 6(7), pp. 1205–1210
53 2015 Synthesis of Lithium Titanate (Li4Ti5O12) through hydrothermal process by using Lithium Hydroxide (LiOH) and Titanium Dioxide (TiO2) xerogel
Jurnal: International Journal of Technology, 2015, 6(4), pp. 555–564
54 2014 The Preparation of Porous TiO2 Nanostructure by Triblock Copolymers Co-Templating Method of TiOSO4 Solution Derived from Ilmenite Ore
Jurnal: Advanced Materials Research, 2014, 887-888, pp. 132–138
55 2014 The effect of pH and heat treatment on the porous TiO2 nanostructures derived from triblock copolymer templating-precipitation technique of TiOSO4 solution
Jurnal: Applied Mechanics and Materials, 2014, 525, pp. 101–107
56 2014 The effect of precursor mixing temperature during precipitation process on the size of ZnO nanoparticles and the dispersion of ZnO@SiO2 core-shell nanostructure
Jurnal: Applied Mechanics and Materials, 2014, 525, pp. 108–116
57 2014 Controlling the Size and Dispersion of ZnO@SiO2 Core-Shell Nanostructure by Addition of Triblock Copolymer Surfactant and pH Adjustment during
Jurnal: Advanced Materials Research, 2014, 887-888, pp. 147–155
58 2014 Influence of mass ratio of aquadest and TTIP on the synthesis of TiO2 nanoparticles to improve the performance of DSSC with beta-carotene as sensitizer
Jurnal: Advanced Materials Research, 2014, 896, pp. 481–484